Click image to view full size image
The double gun corrugated cardboard welding machine adopts laser detection. The changes in corrugated cardboard are transmitted to the laser through the contour of the workpiece. The double gun corrugated cardboard welding machine analyzes the converted data through a motion controller while scanning and welding in real-time.
The double gun corrugated cardboard welding machine can automatically control the height of the welding gun, achieving automatic forward and backward, up and down, and rotating movements of the welding gun. After data analysis of the motion controller, the welding gun maintains a constant linear speed during the welding process. All mechanical transmission devices are driven by servo motors. Improve the tracking accuracy of the welding gun. The working efficiency of the double gun corrugated cardboard automatic welding machine is twice that of the ordinary single gun corrugated cardboard automatic welding machine.
1. Laser real-time scanning of the welding trajectory of the workpiece;
2. Weld while scanning to improve welding efficiency;
3. The control system adopts a servo system motion controller, which improves the operational accuracy of the equipment;
4. Easy to operate.
When using an automatic welding machine, it is also necessary to pay attention to the following points:
Before operating the welding machine, it is necessary to familiarize oneself with the button functions on the control panel and promptly browse the displayed content.
Confirm the product model, software version, product serial number, etc. of the device based on the information displayed on the display screen.
Select welding standards, PE pipe material types, and welding modes, and input welding parameters based on the information displayed on the display screen.
Set the temperature of the heating plate and detect the initial drag pressure.
During the welding process, the welding machine will monitor real-time changes in pipe resistance, current ambient temperature, and input voltage fluctuations, accurately adjust output voltage and current, and ensure welding quality.
When welding is completed, remember to turn off the power supply of the welding machine before removing the terminal.
https://www.xnequipment.com/