Click image to view full size image
Double Gun Automatic Welding Machine For Trailer Base Plate：
The use and adjustment of Double Gun Automatic Welding Machine For Trailer Base Plate involve multiple aspects, including adjusting the height of the welding head, adjusting the workbench, adjusting the clamping force, adjusting the current, etc. The following are the specific operating steps and precautions:
Adjusting the height of the welding head: The height of the welding head is generally divided into 0-30mm, and the appropriate welding head height is selected according to actual needs. If using jog mode, simply turn the switch to the manual position; If using automatic mode, you need to press the start button and then stop to complete the starting, stopping, and reversing of the motor.
Adjusting the workbench: When the equipment starts running, the stroke of the workbench will gradually increase until it reaches the set value. After reaching the set value, the workbench will stop. At this point, it is necessary to activate the button again, and then continue to repeat the above steps to reach the new setting for the journey.
Adjusting clamping force: The magnitude of clamping force will affect the machining quality of the equipment. In general, adjustments can be made according to the actual situation. Firstly, turn the switch to manual mode, then adjust the knob to the appropriate position and press the start button once to complete the starting, stopping, and reversing of the motor.
Adjusting the current: The magnitude of the current will affect the surface smoothness of the product, so it needs to be adjusted according to the actual situation. Usually, the knob can be adjusted to an appropriate value. In addition, the current level can be directly observed through digital display, allowing for a more intuitive understanding.
https://www.xnequipment.com/